SL3000
Amplifier - Rack mounted
The SL3000 Amplifier is a three-way, active control and amplification system specifically designed for the KV2 Audio SL Series modular loudspeaker systems. The SL3000 Stereo Amplifier drives and controls one SL412 per channel and follows the typical KV2 holistic approach of matching components with high-quality electronics for true direct performance. The SL3000 utilizes a 1000-watt high efficiency – current enhancing, switch–mode technology, with linear active filter design for the low mid-section, a 200-watt class AB push-pull low intermodulation design amplifier for the mid-range, and a similar 100-watt design for the high frequencies. It houses all time-alignment, phase correction, amplification, and equalization, as well as provides an external subwoofer crossover output to run further subwoofer cabinets if needed.
Features
High Frequency - 100-watt, Class AB, push-pull, low intermodulation design
Mid Frequency - 200-watt, Class AB, push-pull, low intermodulation design
Low Frequency - 1000-watt, high-efficiency, current-enhancing switch mode technology
Applications
Specifically designed as the amplification and control elements for the SL loudspeaker systems in a 4RU mount module
Fixed Installations
Output Channels
Number of Channels: 2 (stereo)
Total Output Power: 2 x 1300W
High-Frequency Amplifier Specification
Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output
Rated Continuous Power: 100W
Distortion: <0.02%
Operating Bandwidth: 2,5kHz to 40kHz
Mid Frequency Amplifier Specification
Type: Class AB - Push-Pull - Low IM Design, Transformer balanced output
Rated Continuous Power: 200W
Distortion: <0.02%
Operating Bandwidth: 400Hz to 2,5kHz
Low-Frequency Amplifier Specification
Type: High efficiency, Current-enhancing switch mode
Rated Continuous Power: 1000W
Distortion: <0.02%
Operating Bandwidth: 35Hz to 400Hz
Signal Input
Input Sensitivity: 2.2V RMS
Input Impedance: 20kΩ (balanced)
Speaker Output
Speaker Output: 2 x AP6
Power Requirements
Power Connector: 2 x Neutrik PowerCon®
Operating Voltage: 115V / 230V / 250V
Operating Voltage Range: 100 to 120V@60Hz | 205 to 240V@50Hz | 225 to 260V@50Hz
Recommended Amperage: 2x10A 115V | 2x5A 230V | 2x5A 250V
Physical Dimensions
Height: 177.8 mm (7.0"), 4RU
Width: 481.4 mm (18.95")
Depth: 495 mm (19.5")
Weight: 39.2 kg (86.62lbs)
Product code
KVV 987 280 - SL3000 Amplifier - 250V
KVV 987 279 - SL3000 Amplifier - 230V
KVV 987 278 - SL3000 Amplifier - 115V